Popular Search Terms
One World One Price

Gevey Ultra Supreme PRO Pass Unlock Turbo Sim For iPhone 4 4G 4.1 to 5.0(gevey ultra+ ,gevey pass ,gevey supreme,gevey pro)

Be the first to review this product

Payment Option:

Availability: In stock


Quick Overview

iOS 4.0, 4.1, 4.2.1, 4.3, 4.3.1, 4.3.2,4.3.3, 4.3.4 and 4.3.5
Baseband 1.59, 2.10, 3.10.1, 4.10, 4.10.1
Custom Sim Tray
MicroSim Sticker Guild
Note: Automatic process works on iOS 4.0, 4.1, 4.2.1,
4.3, 4.3.1, 4.3.2 and 4.3.3.

* Required Fields

Recommended Products in RGKNSE:

Related Tags

Use spaces to separate tags. Use single quotes (') for phrases.


1.gevey ultra+(color:red  blue orange)  ic f981





How to use the Gevey ULTRA?

For Automatic Unlock (EXPERT Users ONLY):

  1. Jailbreak your iPhone 4, (need to do manually; if you do not have Cydia, visit iclarified.com t hen go to their tutorials section)
  2. Open Cydia and add www.x3groove.com to cydia source. (Click Manage>Sources>Edit>Add)
  3. Install FusiousMod.com (Click FusiousMod.com>FuriousMod>Inst


    all>Confirm) then turn off your iPhone 4. If the installation is success, a red Fu riousMod icon will be appeared.
  4. Put your Micro sim card on the Gevey ultra sim and insert into the iPhone 4. (Important Note: If the chip on the SIM Card contact with the chips bottom, it will cause the chip short circuit, and it will show NO SIM on the iPhone.).  
  5. Turn on your iPhone 4. Welcome Message screen will appear. Accept it then wait for about 1-2 min then signal will show up. (NOTE: Gevey Welcome Message will show up, then followed by the "No Sim" message. Do not worry. Nothing you need to do, just patiently wait for 1-2 min.)

For Manual Unlock: (All Users): You do not need to jailbreak your iPHONE 4

  1. Make sure your Cellular Data "ON" - Data roaming is "OFF" first and 3G is "OFF". (Click Setting>General>Network)
  2. Turn off your iPhone and insert your SIMCARD and GEVEY SIM together with the SIM tray provided.
  3. Turn on your iPhone and wait for the SIM welcome menu and then select 'ac cept'. (If it doesn't show u p then Click Setting>Phone>Sim application>Turn on Language)
  4. Then wait 15 seconds, dial '112' then click on 'CALL' hang up 3 sec. (DO NOT make it connected.)
  5. Then go to SETTING, and turn AIRPLANE MODE to ON and wait unt
  6. il you see 'No SIM Card Installed' and then turn off AIRPLANE MODE.  Your Phone should have signal after a few seconds.

For IPHONE iOS 5.0 Unlock: (Advanced EXPERT Users ONLY): Warning: Use at Your Own Risk - Baseband Preservation Method

  1. Update to iOS 5.0 using Sn0wBreeze (2.8b8 or above) or RedSn0w (0.9.9b5 or above) baseband preservation tutorial.
  2. Put your phone into Pwned DFU mode using a tool provided by Sn0wbreeze called iREB
  3. Use that CUSTOM created IPSW iOS 5.0 to update your phone.
  4. then use any AT&T or Rogers SIM to activate it.   
  5. Then follow the Gevey Pro dail 112 process
  • Turn off your phone
  • Take Gevey SIM out
  • Insert your Gevey SIM again  


  • Turn On your phone
  • Wait for the black screen to appear and tap ‘accept’ (If it doesn’t appears go to Settings>Phone>SIM Applications and select ‘English’).
  • Wait for the ‘No Service’ message on the status bar and then count 15 seconds.
  • Dial 112 and count 3 seconds then hung up.   
  • Go to Settings and toggle AirPlane mode REPEATEDLY, every time you toggle on and off a message popup will appear, continue to do that until NO popup appears, the statusbar message will say “Searching…” and few seconds later you’ll get signal.

IMPORTANT NOTE: Make sure that your IPHONE still on these Baseband 1.59, 2.10, 3.10.1, 4.10, 4.10.1 else it will not work with iOS 5.0


  • 1 x Specially design for iphone 4 sim tray
  • 1 x Gevey Ultra Unlock Sim
  • 1 x Instruction sheet to help you to unlock it


2.GEVEY PASS+-ICF300(color:blue red green) no 112








Warning:Please don't update your iphone4 IOS to newest,otherwise your iphone4 will be unable the unlocking!
GEVEY Ultra+ user's manual

*You need jailbreak and install software!
*No need cutting Micro SimCard once again!


1,Please jailbreak your iPhone4!

2,Add CYDIA Source:http://www.furiousmod.com/cydia or http://www.x3groove.com,Install furiousMod software.

3,Turn off your iPhone4 and insert your "Micro SimCard" and "Gevey Ultra" together with the "Gevey tray",Turn on iPhone4,Display Gevey Ultra "welcome menu" then,select "Accept"or"Cancel",Waiting the signal appears.

4,If iPhone4 display "You have just failed! ... ...",Please restart your iPhone4.



* You need to call 112 and follow the all steps at The first time unlock !

* After first time unlock was succeed,Your IPHONE4 will be able use internet and also can shut off even take the SIM card out at any time, the device will be get the signal back automatically when you just turn it on in the future.

Instructions:(Gevey pro Using the method )

>> STEP1.Turn off your iPhone4 and insert your SimCard and Geveypass Sim together with the


sim tray.

>>STEP2.Turn on your iPhone4 and wait for the << welcome menu >> show up then select "Accept". (At the beginning "no service" will appears on left top of corner,Don't do anything at this time untill the <<welcome menu>> show up

>> STEP3. Dial"112" and hang up within 2 seconds After one signal bar appears on left top of corner (Other Country may call local Emergency number if 112 number was unable )

>> STEP4.After hand up complete Click " home" back to the springboard then Go to "settings" and Turn on "Airplane Mode" right away (After 10-40 seconds ( basically see what kind the carrier and different phone card use),Your iPhone 4 will show "NO SIM card installed" Click " OK" and turn off the "airplane mode"then appears "SIM failure" Click " OK" right away wait for the signal )



* If your SimCard has the 3G/4g service,please turn off 3G feature from Settings >> General >> Network,at the first time unlock.

* After the unlock success,you may turn on 3G/Data Roaming to able the internet.we suggest to turn off 3G when you don't use internet,(when iphone 4 cellular data network missing,Please following instruction dial 112 to unlock once again if you still to use internet feature)

* If the Iphone 4 lost power or turn it off In the future,your handset will get the signal automatically just click "cancel" on the <<welcome menu>> when power on.



F:Gevey pass need cutting SimCard once again?


Q:You need cutting your micro SimCard once again!because Gevey pass above has a chip, You must cutting Micro SimCard the gap which corresponds,lets the chip come out exposing.please carefully cutting,otherwise will dispaly "NO SIM"!


F:Gevey pass unlocking is not successful.

Q:Please into setting>> Restoration>>Restoration all setting,dial "112" unlocking again.trades other SimCard attempt.


F:If iPhone4 display "white apple logo" then,able useing Gevey pass?

Q:No,Display "white apple logo" then,iPhone4 Is at restoration the condition or can't into desktop,after please repair, uses again.


F:Gevey pass power consumption is very high?


Q:power consumption is very high not causes by Gevey pass,Because turning on cellular data network and 3G,remember does not use when the 2G&3G please close the function!

F:Restart iPhone4 can't find signal.

Q:Please into setting>>Carrier:selection corresponds carrier.
Attention:First time unlocking success,Must into setting>>Carrier:selection corresponds carrier.


F:Restarting iPhone4 can't find cellular data network and 3G,signal bar not display "E".

Q:Before the Close-down iPhone4,you must turning off 3G function!this time restarts the iPhone4,the welcome menu selection "accept",dial "112" unlocking once again.


F:After unlocking success and restarting,May I open the flight mode?

Q:After unlocking success and restarting,please don't open the flight mode,that will lose the cellular data network!if your iPhone4 lose the cellular data network,please restarting iPhone4 dial "112" unlocking again.


F:Gevey pass support hot-plugging?

Q:Can't support! After please close down,inserts the Simcard.

F:Each time again restarting,needs to pull out the SimCard to insert the SimCard?



F:First time,no display "Gevey pass welcome menu"!

Q:Please into setting>>Telephone>>Sim application,selection language: Chinese or English!




3.GEVEY Supreme (color:green blue  red  yellow rebel-



green) IC-f300  RGKNSE-factory





Unlock SIM for iPhone 4 All iPhone 4 GSM Model

 GEVEY SUPREME PLUS will work for iOS version 4.1, 4.2, 4.2.1, 4.3, 4.3.1, 4.3.2, 4.3.3, 4.3.5 with basebands 1.59, 2.10, 3.10.1, 4.10.1

Pictures Shown in the listing are actual item pictures not stock or copied from internet so you will receive what you see in the pcitures no surprise at the time to of delivery.

Buy with confidence As this tiem is backed by our money back guarantee


Introducing the GEVEY SUPREME.

You have heard about this awesome new product and now you can be one of the first people to purchase one.

  • You only need to dial 112 once
  • Once you install the Gevey you do not need to dial 112 after reboot even to use GPRS and 3G


will work for iOS version 4.1, 4.2, 4.2.1, 4.3, 4.3.1, 4.3.2, 4.3.3 with basebands 1.59, 2.10, 3.10.1, 4.10.1

Untethered unlock means you don't have to do the manual unlock procedure every time you reboot your iPhone 4.

will automate the manual unlock method, so you will NEVER dial 112 or put your iPhone into airplane mode for 45 seconds etc.


Package Includes:


  • 1x Gevey Supreme Red (Plus) Unlock Sim
  • 1x Sim Card Tray Holder




  1. First go to Settings > Network and Turn off Data Roaming.
  2. Reboot your iPhone.
  3. After rebooting and getting past the unlock screen, insert the Gevey Supreme SIM into the tray with your own micro SIM card on top.
  4. After a few seconds, the screen will show you the welcome screen. Just tap Accept.
  5. Now you will have to dial to 112, wait for the call screen to show and then tap End Call.
  6. Now navigate to Settings and enable Airplane Mode. Wait until you see the "No SIM card installed error", just tap OK.
  7. Disable Airplane Mode and you will be presented with errors, "No SIM card installed" and "SIM Failure".Ignore this and just wait for the device to pick up the signal.
  8. Once you are got the signal, got to Settings > General > Network and toggle Data Roaming On in order to activate your 3G.
  9. Each time you reboot or turn on your iPhone 4, the Gevey welcome screen will show up but this time you will have to tap Cancel.





4.Gevey PRO(color:red) IC:f300

RGKNSE- Factory


* Does not work with the IPHONE 2G 3G/3GS,Just fit for iPhone 4G
Perfect unlocked: Firmware Versions 4.1 / 4.2.1 / 4.3 /4.3.1/4.3.2/4.3.3
* FIRMWARE 01.59.00 / 02.10.04 / 03.10.01 / 4.10.01

* New version Gevey turbo unlock sim card
-----Please Choose a Real Gevey PRO

After Opening the Package:
1. Open the SIM tray of Phone by ejection tool
2. Put the SIM unlock into the slot of SIM tray
3. Attach SIM card together with SIM unlock
4. Slide the SIM tray into the Phone SIM cabinet

Step 1: Turn off your iPhone and insert your SIMCARD and GEVEY SIM together with the metal SIM tray provided.
Step 2: Turn on your iPhone and wait for the SIM welcome menu and then select 'accept'.
Step 3: Then wait 15 seconds, dial '112' then click on 'SEND' hang up within 2 seconds. (DO NOT make it connected.)
Step 4: Then go to SETTING, and turn AIRPLANE MODE to ON and wait until you see 'No SIM Card Installed' and then turn off AIRPLANE MODE. Your Phone should have signal after a few seconds.

1. After completing all of the above steps and there is still no signal, power off your iPhone. Repeat installation steps 1-4.
2. To use 2G/3G network, go to SETTING, then GENERAL then NETWORK then turn on 'Date Roaming'. You also need to go into Cellular Data Network and enter your APN.
3. You can do a language selection for the Welcome message at the STK menu.
4. If you do not see the welcome menu showing up, you can go to 'Setting'-'Phone-'Sim Applications' and select it manually.
5. It might not be compatible with some old version of sim cards, but this is rarely the case. Please replace the sim card with a new one, then try.

Q: Does the GEVEY PRO sim support the latest firmware 4.3.3 (4.10.01)?     
A: Yes, please refer to the compatibility lists stated in this listing above.
Q: Will it work without GEVEY sim after it is unlocked?     
A: No,the Gevey unlock sim should stay with your sim card in the phone all the time. 
Q: If I turn off the phone,do I have to repeat the unlock procedure?   
A: Yes.             
Q: If I go to an area with no signal,and when I return to an area with signal, can it find the signal itself without doing the unlock procedure?
A: Yes,it can find itself.         
Q: Is it hard to do the unlock procedure?         
A: No, honestly it only needs about 2-3 minutes. The instructions are self-explanatory. (If you have qustions,you can contact us)
Q: Does it work for 3G and EDGE?         
A: Yes,it can if you have a data plan with your provider.Not all 3G networks will wor though. For example,you will not see T-mobile with 3G service on,but you will see it working with edge. Just like the software unlocked iPhones.

After all the steps above, if there is still no signal then power off your iPhone 4 and turn back on and repeat all the steps from beginning.To use 3G network you need to turn on “Data Roaming”.


Write Your Own Review

Only registered users can write reviews. Please, log in or register